SM-1 for all Triumph models with 3 pin flasher units. (SM-3 for other Triumph models including the Tiger 1050)

Do you forget to turn off your indicators once in a while? It may be embarassing when you realise it, but also quite unsafe in the traffic.

SignalMinder stops the flashing automatically. You simply replace the indicator relay on your motorcycle.

SignalMinder is a solid-state turn signal flasher with a built-in programmable time-out feature. Selectable time-outs range from 8 seconds to 45 seconds. At the end of the selected time-out, the flashing stops.

Built-in options such as Running Light Conversion, allows you to convert all the turn signals to running lights. More importantly, it also converts a single handlebar switch equipped bikes into a dual channel system. And that gives you 4-Way emergency or Escort mode flash. 

• SM-1 uses a computer chip to cancel the turn signals- no relays. signalMinder has three selectable timeouts; 8, 16, 24 seconds.

• By attaching the two optional turn signal wires, you can convert ALL the turn signals to running lights. Using the dip switches you can select the running light intensity. intensity is about 33% of the full brightness, so that there's ample contrast between flashing at full brightness and on as running lights. #1 Dip switch controls this function

• If the two signal wires have been installed signalMinder has a hazard light option built in. When you activate the RIGHT turn signal three times in succession all the turn signals will flash like a hazard light.

• There's also an input pin for brake switch. If you supply 12 volts from the brake switch of the bike, the counter will suspend until the brakes are released. This feature allows an override for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing.
This feature is OPTIONAL - your choice to connect.