FEATURES:

• High static friction coefficient.
• Good abrasive resistance.
• High braking power to 500°C.
• very good binding strength between copper lined steel base plate and friction layer
• wearing rate by 20 % lower comparing with competitive sintered products of its category for common use
• Low abrasive interaction with the brake rotor material.
• Three(3) times +/- longer operational life compared to organic and Kevlar composite Materials.

Range of Application

• the material is suitable for dry and wet conditions for road/and off-road motorcycles; in road motorcycle application suited both for front/and rear brake while for off-roads we are recommending to use it for front brake
• The material is designed for common road riding application.

MATERIAL OPERATING PARAMETERS:

Specific pressure: P < 5.0 Mpa
Sliding speed: V < 40 m.s-1
Constant maximum temp.: 450°C
Short time maximum temp.: 700°C