Quite possibly the funkiest, most useful, well kitted out little box we've seen for years. Leaps and bounds ahead of anything else on the market in terms of features and price, we present the Shift-I sequential shift light system.

Set the RPM for when the first light turns on, and again for when they all flash. Customise the indicated range to suit 'your' RPM range. The RPM points are easily and accurately set with buttons, not by revving the engine.

Use Shift-I to concentrate on riding, while being able to see the RPM range you're interested in as well as shift point indication. Suited for road use, racing or training.

Stick to the basics and ride, or grab the advanced settings manual for those wanting to tweak!. Customize it to your own preferences.

Battery monitoring feature included . Watch your battery voltage while cranking (automatic function), and check for charging circuit problems. Also includes an automatic alert for regulator over-voltage conditions.

• Super bright for daytime use!!!
• Automatically dims at night.
• Battery monitoring functions.
• Only 3 wires to connect!
• Packed with features
• Designed for both novice and professional use.

  Setting Shift Points
  The lights can be set when to start and when to finish - digitally. No revving of the engine required. Make incremental changes accurately and adjust the display to show the rpm range you're interested in. Display mode can be changed while stationary (stopped or at idle) just by pressing the up or down button. 9 displays modes included.

  Battery voltage indication
  Automatically shows your battery voltage while cranking the engine. To see the battery level whlie travelling just hold the bottom button before turning on the ignition.
  Great for checking the alternator/regulator voltage output.

  Brightness control
  Press both buttons together and you can now increase of decrease the brightness.
  The Shift-I has a light sensor and remembers the brightness you set from full daylight through to night conditions.

  Cruise mode dimming
  After cruising for a minute the display will automatically dim. If you change speed the brightness will automatically be restored to normal.

  Over voltage alert.
  Shift-I will automatically flash the last two lights to warn you if your ignition voltage stays above 16 volts (adjustable).
  This alerts you to a failed regulator which can cause damage to your battery electrics and light bulbs.

  Colour Display Sequence Options:  Green Amber  Red
  Or Blue Red Display