Kisantech "Tailblazer" Brake Light Modulator - Deceleration Warning "Double" [20-WD-2-Pak]

Tail Blazer 20-WD-2-Pak For bikes fitted with a Dual stop/tail lamps

BE SAFE! Compared to a typical automobile, motorcycle stop lamps are simply too small to attract immediate attention. This is especially true for the cruisers because they are mounted so low to the ground.

tailBlazer overcomes this by rapidly flashing the taillights the instant you apply the brakes. The flash rate then slows down to a steady ON - this cycle lasts about 4 seconds. This flash pattern is called a Deceleration Warning.

Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop.
TailBlazer does it automatically, and by flashing both filaments for a maximum brightness.

The Kisan Tail Blazer is a direct replacement "Super Bright Halogen Stop/Tail Bulb" With the decelaration sequence program built into the bulb housing.
Simple plug&play fitment.
It also comes complete with a spare bulb.

TailBlazer Notes

■ Unique exponential decay flash pattern
■ As easy as replacing a bulb
■ Programmable taillight intensity